How to remove or bypass Comio C1 FRP

These are the instructions to remove or bypass the Comio C1 FRP protection using the SP Flash Tool on Windows Computer.

Requirements: Your device needs to have at least 30-40 percent of battery to perform the flashing process.

Remove Comio C1 FRP using SP Flash Tool

  1. Download and install MediaTek Drivers on the Computer. If in case Mediatek Drivers are already installed on the computer, then SKIP this step.
  2. usb logo

  3. Download and Extract the Comio C1 FRP Remove File on the computer. After Extracting the Comio C1 FRP File, you will be able to see the following files:
  4. Comio C1 FRP

  5. Download and Extract the latest version of SP Flash Tool on the Computer. After Extracting the SP Flash Tool on the Computer, you will be able to see the following files:
  6. SP Flash Tool Extracted Files

  7. Open Flash_Tool.exe.
  8. Open SP Flash Tool

  9. Once SP Flash Tool is Launched, Click on the Download Agent Choose button and Select the Comio_C1_DA.bin (found in the FRP Files Folder).
  10. sp flash tool download agent
    sp flash tool download agent

  11. Click on the Scatter Loading Button and Load the Comio C1 Scatter File (found in the extracted file in Step#2).
  12. sp flash tool comio c1 scatter
    sp flash tool comio c1 frp scatter

  13. Click on the Format Menu.
  14. sp flash tool manual format flash

  15. Under Format Menu, Select Manual Format Flash.
  16. sp flash tool manual format flash

  17. Set the Following parameters: Region: EMMC_USER, Begin Address[HEX]: 0x6a00000, Format Length[HEX]: 0x100000.
  18. manual format parameter

  19. Click on the Start Button:
  20. manual format start

  21. Connect your Device to the Computer using the USB Cable (make sure the device is Power Off). After connecting the device to the computer, Press Volume Down and Up Keys on your Smartphone to get it detected by the SP Flash Tool.
  22. mobile usb computer

  23. Once SP Flash Tool detects the device, the flashing process will start automatically and may take up to 5 minutes to complete. Once the Flashing process is completed, you will be able to see the Green Tick at the End.
  24. MT6737M 0x6a0000 0x100000 Success

  25. Now, Close the SP Flash Tool and disconnect your device from the computer.
  26. disconnect mobile computer

    Congratulations! Now, Restart the Device and you won’t be facing the FRP protection on the device.

    Readme Once:

    [] Caution: Removing the FRP (factory reset protection) from the Android Device will wipe the data from the device. Therefore, we recommend you take a backup of your data before following the tutorial above.

    [] Alternative Tool: SP Multiport Download Tool is the alternative Flash Tool which can be used to flash or install the Scatter Firmware.

    [] Comio Stock Firmware: If you are looking for the original firmware for your device, then head over to Download Comio Stock Firmware page.

    [] Comio USB Driver: If you are looking for the original USB Driver for your device, then head over to Download Comio USB Driver page.

    [] Credits: The FRP file shared above is submitted by our reader Gsm Abdullah. So, full credit goes to him for sharing the File for free.

Leave a Comment